Upload Your Own Image »

Iron Stop® Mossy Oak® Moose Wind Spinner

model #: MOD220-10

 $9.00 Sale
$30 (70% off)
Free Shipping over $69.99
Best Used For:
Incorporating the great outdoors in your own back yard. The signature camouflage pattern and stately Moose design of this 10" wind spinner will fascinate you and visitors as the spinner employs the next breeze sending it spinning in circles for a captivating display. read full product details »
US Availability: In-Stock


Iron Stop® Mossy Oak® Moose Wind Spinner



This Iron Stop® Mossy Oak® Moose Wind Spinner will look magnificent on any deck or patio. Moose, being the largest of the deer species, grow antlers that can span more than six feet. This wind spinner displays the head of a Moose as he looks out over your outdoor wellspring. A slight breeze will set the spinner in motion providing a mesmerizing display.


swivel hook


Distinctive Decor - for Indoors or Out

The Mossy Oak® wind spinner adds a decorative touch to any home office, family room, or man cave. It also looks amazing when hung out in the yard or from the porch of your home, cabin, or favorite hunting lodge creating an outdoor focus.





Placing the Wind Spinner

Whether you choose to use it indoors or out, you'll want to place your Mossy Oak® wind spinner ornament someplace that is easily visible. Hang it on a shepherd's staff in the garden, a hook on a trellis or from the eaves, or near an inside window to best showcase it's intricate cutouts and a light-refractive finish. 


Hanging the Wind Spinner

The wind spinner comes ready to hang from the box; simply fan it open and adjust the individual rings as needed for optimal movement. The included swivel hook allows it to twist and twirl in the breeze and ensures easy installation. You can use the swivel hook attachment alone or connected to an extension chain or an Iron Stop® hook accessory to achieve just the right placement (additional accessories sold separately). Opening your wind spinner fully allows it to spin in the wind.



3 Easy Steps to Set Up Your Wind Spinner

Three Easy Steps
  1. Remove wind spinner from the box. Hold the wind spinner in both hands with your right hand at the top near the hook and left hand at the bottom.
  2. Position your thumbs on the innermost ring just to the left of the center spine and push away from you. The wind spinner should fan open by itself.
  3. Continue until there is about half an inch between each ring as pictured. Adjust individual rings as needed.

Note: Designer sun wind spinner (model BD315-10) shown above for illustration purposes (not included).


Weather-Resistant Powder-Coated Steel

Though delicate in appearance, the wind spinner is made of laser-cut 20-gauge steel for superior durability. It's painted with UV-protected ink and finished with a high-gloss, rust-resistant powder coating to help keep the spinner safe from the elements season after season, year after year. 


Accessorizing with Wind Chimes and More

Add even more enjoyment to your wind spinner by attaching some creative accessories from Iron Stop®'s handsome indoor/outdoor collections. A spiral tail or wind chime (both sold separately) adds extra flair to your spinner. Iron Stop® also offers battery- and solar-powered motors that create a continuous spinning action--perfect for use indoors or outside on a windless day.


Thanks to top and bottom hanging holes, the Mossy Oak® wind spinner can be hung from additional wind spinners to create a customized display. Each wind spinner offers an utterly unique design that reflects the spirit of the great outdoors.


Mossy Oak® wind spinner imagery includes everything from a beautifully detailed trout, a bass, a majestic deer, and a mallard duck to a magnificent elk, a grand moose, and a turkey with an impressive fan of tail feathers, even a yellow hunting dog with a freshly caught bird in its mouth. The Mossy Oak® collection also includes a variety of animated wind spinners, which include images in motion--a fish jumping out of the water to catch a dragonfly, a mallard duck in flight over a lake, and a deer leaping through powder-white snow. The collection offers something for everyone.


Made in the USA

Proudly made in the USA, the eye-catching wind spinner measures 10 inches in diameter and makes a thoughtful gift idea for friends and family, whether they're new homeowners, outdoor enthusiasts, hunters, or collectors. 



Mossy Oak® Wind Spinner Collection:

Choose from a wide variety of wind spinners from the Mossy Oak® wind spinner collection. Click on any of the samples shown below to view additional styles.


turkey deer bear duck elk trout



Wind Spinner FAQs


Q:  Where are Iron Stop® wind spinners made?

A:  All of Iron Stop®'s wind spinners are proudly made in the USA.




Q:  Will my wind spinner fade if I leave it outside?


A:  Iron Stop® spinners utilize state-of-the-art FujiFilm ink that includes UV protection to maintain its brilliance longer.



Q:  Is this the same wind spinner others offer?

 A:  No, this is a one-of- a-kind, exclusive copyrighted design available only from Iron Stop®.



Q:  What if there isn't any wind? How will my wind spinner work?

A:  You can purchase an Iron Stop® battery- or solar-powered motor that automatically spins your wind spinner for you.



Q:  What type of metal is used to make the spinners?

A:  The wind spinners are made of heavy, 20 gauge, cold rolled steel.




Q:  Does the gloss coating offer any special ingredients or protection?


A:  The gloss coating on Iron Stop®'s wind spinners is an enamel powder coat. The powder is sprayed on and then the products are run through an oven that melts the powder into the gloss coat. It effectively seals the steel to make it rust resistant. The powder coat used also contains glitter to make the products sparkle even more in the light.



Q:  What is the process when beginning a new design?


A:  Iron Stop®'s wind spinners are hand-sketched, copyrighted, one- of-a-kind designs. They start the old-fashioned way with a pencil and paper. The design is sketched on paper to get a rough idea of what they want designed and how the piece will look. Once they get the basic shape figured out they scan the sketch and redraw it on the computer using special software. Once it is where they want it they send the file to a laser programmer to have a sample made. After they get the sample back and make any necessary adjustments they then proceed to designing the graphics.



Q:  What exactly is lenticular?


A:  Lenticular images are digital files that have been specially prepared and then printed on a lens material. This material is a special plastic made up of lenticules, hence the name lenticular printing. The image, viewed through the lenticules, appears to move as it is turned creating dramatic animation or depth.



Q:  What's the difference between lenticulars and holograms?


A:  Holograms are usually monochromatic (one color) and need to be lit perfectly in order to be seen. Lenticular is a printing process; it does not need special lighting in order to look its best and does not scratch.




1 Wind Spinner
$29  $9.00 Sale
1 Intermittent Motor
$22  $10.50 Sale